linuxserver/ddclient ¶

Ddclient is a Perl client used to update dynamic DNS entries for accounts on Dynamic DNS Network Service Provider. It was originally written by Paul Burry and is now mostly by wimpunk. It has the capability to update more than just dyndns and it can fetch your WAN-ipaddress in a few different ways.

Supported Architectures¶

We utilise the docker manifest for multi-platform awareness. More information is available from docker here and our announcement here.

Simply pulling lscr.io/linuxserver/ddclient:latest should retrieve the correct image for your arch, but you can also pull specific arch images via tags.

The architectures supported by this image are:

Architecture	Available	Tag
x86-64	✅	amd64-<version tag>
arm64	✅	arm64v8-<version tag>
armhf	❌

Application Setup¶

Edit the ddclient.conf file found in your /config volume (also see official ddclient documentation). This config file has many providers to choose from and you basically just have to uncomment your provider and add username/password where requested. If you modify ddclient.conf, ddclient will automaticcaly restart and read the config.

Get dynamic IP from Fritz.Box¶

If ddclient shall fetch the dynamic (public) IP-address from a fritz.box (AVM) add the following line to /config/ddclient.conf:

use=cmd, cmd=/etc/ddclient/get-ip-from-fritzbox

Usage¶

To help you get started creating a container from this image you can either use docker-compose or the docker cli.

docker-compose (recommended, click here for more info)¶

---
services:
  ddclient:
    image: lscr.io/linuxserver/ddclient:latest
    container_name: ddclient
    environment:
      - PUID=1000
      - PGID=1000
      - TZ=Etc/UTC
    volumes:
      - /path/to/ddclient/config:/config
    restart: unless-stopped

docker cli (click here for more info)¶

docker run -d \
  --name=ddclient \
  -e PUID=1000 \
  -e PGID=1000 \
  -e TZ=Etc/UTC \
  -v /path/to/ddclient/config:/config \
  --restart unless-stopped \
  lscr.io/linuxserver/ddclient:latest

Parameters¶

Containers are configured using parameters passed at runtime (such as those above). These parameters are separated by a colon and indicate <external>:<internal> respectively. For example, -p 8080:80 would expose port 80 from inside the container to be accessible from the host's IP on port 8080 outside the container.

Ports (`-p`)¶

Parameter	Function

Environment Variables (`-e`)¶

Env	Function
`PUID=1000`	for UserID - see below for explanation
`PGID=1000`	for GroupID - see below for explanation
`TZ=Etc/UTC`	specify a timezone to use, see this list.

Volume Mappings (`-v`)¶

Volume	Function
`/config`	Persistent config files

Miscellaneous Options¶

Parameter	Function

Environment variables from files (Docker secrets)¶

You can set any environment variable from a file by using a special prepend FILE__.

As an example:

-e FILE__MYVAR=/run/secrets/mysecretvariable

Will set the environment variable MYVAR based on the contents of the /run/secrets/mysecretvariable file.

Umask for running applications¶

For all of our images we provide the ability to override the default umask settings for services started within the containers using the optional -e UMASK=022 setting. Keep in mind umask is not chmod it subtracts from permissions based on it's value it does not add. Please read up here before asking for support.

User / Group Identifiers¶

When using volumes (-v flags), permissions issues can arise between the host OS and the container, we avoid this issue by allowing you to specify the user PUID and group PGID.

Ensure any volume directories on the host are owned by the same user you specify and any permissions issues will vanish like magic.

In this instance PUID=1000 and PGID=1000, to find yours use id your_user as below:

id your_user

Example output:

uid=1000(your_user) gid=1000(your_user) groups=1000(your_user)

Docker Mods¶

We publish various Docker Mods to enable additional functionality within the containers. The list of Mods available for this image (if any) as well as universal mods that can be applied to any one of our images can be accessed via the dynamic badges above.

Support Info¶

Shell access whilst the container is running:
```
docker exec -it ddclient /bin/bash
```
To monitor the logs of the container in realtime:
```
docker logs -f ddclient
```

Container version number:

docker inspect -f '{{ index .Config.Labels "build_version" }}' ddclient

Image version number:

docker inspect -f '{{ index .Config.Labels "build_version" }}' lscr.io/linuxserver/ddclient:latest

Updating Info¶

Most of our images are static, versioned, and require an image update and container recreation to update the app inside. With some exceptions (noted in the relevant readme.md), we do not recommend or support updating apps inside the container. Please consult the Application Setup section above to see if it is recommended for the image.

Below are the instructions for updating containers:

Via Docker Compose¶

Update images:

All images:
```
docker-compose pull
```
Single image:
```
docker-compose pull ddclient
```

Update containers:

All containers:
```
docker-compose up -d
```
Single container:
```
docker-compose up -d ddclient
```

You can also remove the old dangling images:
```
docker image prune
```

Via Docker Run¶

Update the image:

docker pull lscr.io/linuxserver/ddclient:latest

Stop the running container:
```
docker stop ddclient
```
Delete the container:
```
docker rm ddclient
```
Recreate a new container with the same docker run parameters as instructed above (if mapped correctly to a host folder, your /config folder and settings will be preserved)
You can also remove the old dangling images:
```
docker image prune
```

Image Update Notifications - Diun (Docker Image Update Notifier)¶

Tip

We recommend Diun for update notifications. Other tools that automatically update containers unattended are not recommended or supported.

Building locally¶

If you want to make local modifications to these images for development purposes or just to customize the logic:

git clone https://github.com/linuxserver/docker-ddclient.git
cd docker-ddclient
docker build \
  --no-cache \
  --pull \
  -t lscr.io/linuxserver/ddclient:latest .

The ARM variants can be built on x86_64 hardware using multiarch/qemu-user-static

docker run --rm --privileged multiarch/qemu-user-static:register --reset

Once registered you can define the dockerfile to use with -f Dockerfile.aarch64.

Versions¶

08.07.24: - Fix cache issue.
08.07.24: - Don't copy config from /config/ddclient.conf to /ddclient.conf at runtime.
27.06.24: - Rebase to Alpine 3.20.
23.12.23: - Rebase to Alpine 3.19.
25.08.23: - Rebase to Alpine 3.18.
04.07.23: - Deprecate armhf. As announced here
13.02.23: - Rebase to Alpine 3.17, migrate to s6v3.
20.10.22: - Update build instructions for 3.10.0. Update default ddclient.conf.
15.01.22: - Rebase to Alpine 3.15
15.05.21: - Distribute script 'sample-get-ip-from-fritzbox' from ddclient repo
08.03.21: - Added bind-tools to provide nsupdate
01.06.20: - Rebasing to alpine 3.12.
08.02.20: - Ingest from Github.
06.02.19: - Fix permissions.
19.12.19: - Rebasing to alpine 3.11.
28.06.19: - Rebasing to alpine 3.10.
23.03.19: - Switching to new Base images, shift to arm32v7 tag.
10.03.19: - Add perl-io-socket-inet6 for ipv6 support.
22.02.19: - Rebasing to alpine 3.9.
11.02.19: - Add pipeline logic and multi arch.
22.08.18: - Rebase to alpine 3.8.
10.08.18: - Update to ddclient v3.9.0. For Cloudflare users, please ensure you remove the line server=www.cloudflare.com from your ddclient.conf.
07.12.17: - Rebase to alpine 3.7.
28.05.17: - Rebase to alpine 3.6.
10.02.17: - Rebase to alpine 3.5.
26.11.16: - Update README to new standard and add icon and other small details.
29.08.16: - Initial release.

linuxserver/ddclient¶